The flawless functioning of the door is ensured by several components. The garage door cable is one of them. As soon as you discover there is an issue with it, you need to fix it. You can either call a professional or do it yourself, depending on the problem.
If your garage door cable is broken, and you want to fix it yourself, you will find some helpful tips in this article.
It is important to know that repairing a garage door cable can be dangerous. It is better to call a professional service when you don’t know what to do with the cable.
The Purpose of Garage Door Cable
It is important to know the role the garage door cable plays.
A garage door cable is a twisted wire that is attached to the spring. The garage door frame has a connecting end. This cable is used to open the door. Reducing tension on the springs prolongs their life.
If the springs break, the cable will prevent them from flying. The garage door can be slammed shut when the springs break. This can damage your car. Even if the springs break, the door will not slam if the cable is working.
There are useful tips for garage door repair.
Here are some things you can do yourself to repair your garage door cable.
Understanding different types garage door los angeles of garage door cables
You need to know the type of cable your garage door uses.
Torsion spring cables
Lifting cables are used to help lift a garage door. Most garage doors use springs that are more durable than other types. They are better at keeping the door in working order.
Torque is required for the springs to work. Each side of the door has a cable on it. It wraps around the door to open and close.
The purpose of the spring is to provide force while the cable lifts the door. Keeping the door balanced requires drums.
The less the diameter, the quieter the operation is. When the door opens, thick cables wrap around the drum.
77 cables have a diameter of less than 1 inch. As the cables wind around the drums, they can make noise. The 719 strand is another option. The cables have more weight capacity and don’t produce much noise.
It is best to use thinner torsion spring cables with a diameter of 3/32-inch. The cables are usually enough for most garage doors. Before using any type of cable, you should check the weight of the garage door.
Extension spring cables
Extension springs are used along with lifting cable to lift a door. The garage door has springs on it. The springs are connected to the cables. The springs contract when the door opens or closes.
Most garage doors have enough weight capacity to use 3/32-inch cables. You can use 719 cables if you want more flexibility and more weight capacity.
Safety cables and extension springs are used to keep the springs in place in case they break. The cables go through the extension spring and connect to the door.
The life cycle of the springs is around 10,000 cycles, which means they will break at some point. If your safety cables are broken or damaged, it is always better to replace them quickly.
Common garage door cable issues
You need to figure out the problem with the garage door cable before you can do it yourself. There are some garage door cable problems.
- Cable is broken
Over time, the garage door cables can wear down. If this happens, you can see the cable.
- Cable slips off the drum
There are a number of reasons that the cable can not wound around the drum. The diameter and length of the cables should be checked first. Check the drum’s size.
The springs don’t have the right amount of tension can cause issues with cables. The cables can slip off the drums if the springs are too tight.
- Cable can become unwound
The garage door cables need to be replaced.
- Fraying cables
The appearance of your garage door cables is a good indicator. They must be replaced immediately.
There is a problem with the garage door cable.
There are many reasons why the garage door isn’t working. If you detect any of these problems, it can be a sign that the cables are malfunctioning.
- The door isn’t opening properly
Check the springs and motor of your garage door. The cable can be broken if the motor and springs are not working.
- Unbalanced door
If your garage door is leaning, it is usually because of loose cables. You can adjust the cables. An unbalanced garage door can be caused by cables that are damaged.
- The door isn’t working at all
If your garage door cable is broken, you can’t open it.
The garage doors have safety features. The door will stop moving if the cable is broken.
- The door is closing too fast
If your garage door slams down or closes faster than usual, broken or damaged cables can be the cause.
- Cable hanging loose
You can usually see the garage door cable hanging loose after it snaps.
Do it yourself guides for garage door repair.
There are a few quick guides to help you fix your garage door.
Replacing garage door cables
Tools you’ll need:
First of all, open the door. Pull the emergency release handle to open the door. The door opener will be disengaged. Vice grips are used to hold the door in place. Unwinding the springs will remove the tension on them. The screws on the springs need to be loosened. The winding bars should always be inserted fully. If your garage door has two springs, check it. Continue these steps for the other spring as well. Use a wrench to loosen the screws on the drum. The cable needs to be removed from the bottom. You can remove the screw with a wrench. The new one can be installed once the cable is removed. Attach the new cable to the bottom of the drum. To tighten the cable, rotation the drum clockwise. Attach it with screws. Even if only one of the cables is broken, it is better to replace it. You can make sure the cables are the same. Increase the tension on the springs with the help of winding bars Pull down the emergency release handle if you want to re-open the door.
- New garage door replacement cables
- Vice grips
- Socket wrench
- Winding bars
Tightening loose garage door cables
Tools you’ll need:
The automatic control should be used to close the garage door. The cables that connect the garage door to the ground are loose. Pull down the red cord to get the door open. The door will be unlocked and put in manual mode. You can open the door with your hands. The garage doors have something on them. C-clamps can be used if the door doesn’t already have them. You can slide a metal lock into the track of a garage door to hold it in place. Wind the cable around the pulley with your hands if it has come off completely. Wrap the cable tightly. The cable will get tighter once you disengage the door. If your garage door cable is loose, you should adjust it. If you still see slack on the cable, you have to loosen the hold on the cable. You will need pliers. Attach the cable through the brackets. Attach the cable back to the frame Pull the red cord if you want to re-open the door.
Is garage door cable repair a good idea?
If you don’t follow the instructions correctly, it can be dangerous to repair garage door cable on your own. It is easy to tighten loose cables and doesn’t involve much risk.
Extension spring cables are more convenient to replace. The springs are under a lot of stress. Spring can cause serious injuries if something goes wrong. There is a risk of falling garage doors when you replace extension spring cables. If you can’t fix the garage door cable, call a professional service.
There are several reasons why a garage door cable is important. It keeps the springs from flying if they break and helps with the smooth operation of the door. If there is a problem with your cable, you need to fix it. It is better to understand the different types of garage door cable before doing it yourself. Safety cables and extension spring cables are included. Follow the instructions and take the required safety precautions.
You need to figure out the issue before you can fix the cable. There are a lot of garage door cable issues.
Are you looking for a quick and easy way to clean your pool? Do It Yourself Pool Cleaning is an article we wrote.